Lightning Protection Products
ZoneBarrier Series-T_ZB24501, ZB24503, ZB24504,ZB24505, ZB24506, ZB24525,ZB24549, ZB24558, ZB24562
Product No：Pro200965124843
Product Model：ZB24501, ZB24503, ZB24504,ZB24505, ZB24506, ZB24525,ZB2454
UpdateTime：
Views：1280
Details：
ZoneBarrier
Protects network and communications applications against induced surges and transients
Wall, DIN rail or 19†rack mountable Expandable, modular protection for one to an unlimited number of ports Three stage protection UL 497A Listed Tested to IEC 61000-4-5 and CCITT K1 10 year product warrantySpecifi cation
All fi gures typical at 77°F (25°C) unless otherwise stated
Ambient temperature limits
–4°F to +185°F (working)
–20°C to +85°C (working)
Humidity
95% RH (non-condensing)
Casing
Moulded plastic
Weight
2.8oz (0.08Kg)
Dimensions
See fi gure 1
EMC compliance
BS EN 60950: 1992
BS EN 61000-6-2: 1999
BS EN 61010-1: 1993
R&TTE compliance
BS EN 50082-2: 1995
BS EN 41003: 1999
Installation
All ZoneBarrier modules are installed in-line and are identifi
ed with “Protected†and “Unprotected†for fail-safe installation.
DIN rail mounting (fi gure 2)
ZoneBarrier modules can be mounted on any standard Tsection DIN rail or on the optional rail assemblies listed below (see the ‘To order’ section for part numbers and further details). These assemblies will accommodate a mix of up to 32 ZoneBarrier modules and can be mounted on any fl at surface or in a 19†rack. To attach the ZoneBarrier module to the rail, simply locate the DIN rail foot of the module over on edge of the DIN rail and then securely push the ZoneBarrier into place. Note the DIN rail must be properly grounded (earthed).
Stand-alone installation (fi gure 3)
To install a ZoneBarrier module as a stand-alone protector, attach a ground (earth) lead to the supplied ring terminal and secure this with the self tapping screw provided to the base of the unit. Using screws (or bolts) mount the module on any fl at surface.
| Model | Type | Maximum surge current (kA) | Wires | Working voltage(V) | Let-through voltage(V) | Bandwidth (MHz) | Connectors |
| ZB24501 | Dial up | 3 | 2 | 200 | 270 | N/A | RJ11 |
| ZB24503 | Leased line | 3 | 4 | 75 | 105 | N/A | RJ11 |
| ZB24504 | Leased line | 3 | 4 | 75 | 105 | N/A | Terminal strip |
| ZB24505 | Digital data | 3 | 4 | 75 | 105 | >10MHz | RJ48S |
| ZB24506 | Digital data | 3 | 4 | 75 | 105 | >10MHz | Terminal strip |
| ZB24525 | Dial up | 3 | 4 | 200 | 270 | N/A | RJ11 |
| ZB24549 | ISDN | 3 | 2 | 75 | 105 | >80MHz | RJ11 |
| ZB24558 | T1 | 3 | 4 | 16 | 28 | >50MHz | RJ48C |
| ZB24562 | ADSL | 3 | 4 | 200 | 270 | 50MHz | RJ11 |
Download：
ZBTelecom.pdf 