Lightning Protection Products
TP-Pipe Series_TP-32P、TP-48P
Product No:Pro20096592819
Product Model:TP-32P、TP-48P
UpdateTime:
Views:1089
Details:
TP-Pipe Series
Safeguards electronic process transmitters against induced surges and transients from field cabling
Easy and direct mounting - simply screws into conduit entry
Straightforward and simple installation
Intrinsically safe and fl ameproof to CENELEC standards
Low impedance series connection avoids signal degradation of the loop
ATEX approved
10 year product warranty
Specifi cation
All fi gures typical at 77°F (25°C) unless otherwise stated
Maximum surge current
10kA peak current (8/20μs waveform)
Leakage current
Less than 10μA at maximum working voltage
Working voltage
48V dc and 32V dc maximum
Bandwidth
1MHz
Resistance
Loop resistance: 1ohm
Ambient temperature limits
-40°C to +85°C (-40°F to +185°F) (working)
-40°C to +85°C (-40°F to +185°F) (storage)
Humidity
5% to 95% RH (non-condensing)
Electrical connections
Input:
3 position socket/header (max wire #14AWG (2mm2)
Output:
3 fl ying leads (line 1, line 2 & earth)
Wire size 32/0.2 (1.0mm2, 18AWG)
Lead length 250mm (9.85”) minimum
Casing
ANSI 316 stainless steel hexagonal barstock,male and
female thread
Weight
175g (6.2oz.)
Dimensions
See fi gure 1
EMC compliance
To Generic Immunity Standards
EN50082, part 2 for industrial environments
Electrical safety
EEx ia IIC T4, Ceq=O, Leq=0; the unit can be connected without further certifi cation into any intrinsically safe loop with open circuit voltage <60V and input power<1.2W.
Ex d IIC T4; the unit is apparatus-approved to fl ameproof(explosionproof) standards, and can be fi tted into a similarly approved housing.
Model | TP-32P | TP-48P | |
Nominal voltage | Un | 32V | 48V |
Rated voltage (MCOV) | Uc | 35V | 58V |
Nominal current | In | 1.5A | 1.5A |
Nominal discharge current (8/20μs) | isn | 3kA | 3kA |
Max discharge current (8/20μs) | Imax | 10kA | 10kA |
Lightning impulse current (10/350μs) | Iimp | 2.5kA | 2.5kA |
Residual voltage @ isn | Up | 46V | 92V |
Voltage protection level @ 1kV/μs | Up | <38V | <76V |
Bandwidth | fG | 7.5MHz | 1MHz |
Capacitance | C | 50pF | 100pF |
Series resistance | R | 0.5 | 0.5 |
Operating Temperature Range | -40°C to +85°C | ||
Category tested | A2, B2, C1, C2, C3, D1 | ||
Overstressed fault mode in=3kA | 12kA | 12kA | |
Impulse durability (8/20μs) | 10kA | 10kA | |
Degree of protection | IP66 | IP66 | |
AC durability | 1Arms, 5T | ||
Service conditions | 80kPa - 160kPa 5% - 95% RH |
Download:
TP-P.pdf