Lightning Protection Products
DEHNguard TNC H LI
Product No：Pro200964102727
Product Model：DEHNguard TNC H LI
UpdateTime：
Views：525
Details：
DEHNguard TNC H LI
DEHNguard TNC H LI Dimension drawing DG TNC H230 400 LI Basic circuit diagram DG TNC H230 400 LI
DG TNC H LI: Multi-pole surge arrester for use in TN-C systems with Pro-Active Thermo Control SPD monitoring device with 3-stage visual indicator.
| DG TNC H230 400 LI | |
| SPD according to EN 61643-11 | Type 2 |
| SPD according to IEC 61643-1 | Class II |
| Nominal a.c. voltage | 230/400 V |
| Max. continuous operating a.c. voltage [UC] | 275 V |
| Nominal discharge current (8/20 µs) [In] | 20 kA |
| Max. discharge current (8/20 µs) [Imax] | 65 kA |
| Voltage protection level [UP] | ≤ 1.25 kV |
| Voltage protection level for 5 kA [UP] | ≤ 1 kV |
| Response time [tA] | ≤ 25 ns |
| Max. mains-side overcurrent protection | 160 A gL/gG |
| Short circuit withstand capability for max. mains-side overcurrent protection | 20 kArms |
| Temporary overvoltage (TOV) [UT] | 335 V / 5 sec. |
| Operating temperature range | -40°C...+55°C |
| Cross-sectional area (min.) | 1.5 mm2 solid/flexible |
| Cross-sectional area (max.) | 35 mm2 stranded/25 mm2 flexible |
| For mounting on | 35 mm DIN rail acc. to EN 60715 |
| Enclosure material | red thermoplastic, UL 94 V-0 |
| Degree of protection | IP 20 |
| Dimension | 3 mods., DIN 4 |
| Approvals, Certifications | KEMA |
| Type of remote signalling contact | -- |
| Type of remote signalling contact | -- |
| Switching capacity a.c. | 250 V/0.5 A |
| Switching capacity d.c. | 250 V/0.1 A; 125 V/0.2 A; 75 V/0.5 A |
| Cross-sectional area for remote signalling terminals | max. 1.5 mm2 solid/flexible |
| Indication of disconnector | green-yellow-red |
| PU | 1 pcs. |
| ordering information | |
| Type | DG TNC H230 400 LI |
| Part No. | 950 160 |
| Packing unit | 1 pc(s) |
