Lightning Protection Products
DEHNsignal E 3
Product No：Pro20096315920
Product Model：DEHNsignal E 3
UpdateTime：
Views：1368
Details：
DEHNsignal E 3
DEHNsignal E 3 Dimension drawing DEHNsignal E 3 Basic circuit diagram DEHNsignal E 3
DEHNsignal E 3: Optical-fibre-based receiver module for selective operating state indication / centralised fault indication by 3 coordinated lightning current arresters DEHNbloc Maxi S and, if required, DEHNgap Maxi S in 5-conductor systems
| DSI E 3 | |
| Supply a.c. voltage [UN] | 230 V |
| Power input [P] | < 550 mW |
| Backup fuse for supply voltage | 16 A gL/gG or C 16 A |
| Operating temperature range | -40°C...+80°C |
| Signal input | 3x by optical fibre plug-in system (LWL ST DSI) |
| Operating state indication | green LED |
| Selective operating state indication | 3 x red LEDs (L1, L2, L3) |
| For mounting on | 35 mm DIN rail acc. to EN 60715 |
| Enclosure material | red thermoplastic, UL 94 V-0 |
| Degree of protection | IP 20 |
| Dimension | 1.5 mods., DIN 43880 |
| Type of remote signalling contact | floating changeover contact |
| Switching capacity a.c. | 250 V/0.5 A |
| Switching capacity d.c. | 250 V/0.1 A; 125 V/0.2 A; 75 V/0.5 A |
| Cross-sectional area | min. 0.5 mm2 solid/flexible; max. 4 mm2 solid/flexible |
| Max. distance with LWL DSI 18M | 6 m |
| Test standards | EN 61010-1:1993 and EN 61010-1/A2:1995 |
| PU | 1 pcs. |
| ordering information | |
| Type | DSI E 3 |
| Part No. | 910 631 |
| Packing unit | 1 pc(s) |
