Lightning Protection Products

EATON innovative technology U.S. _PTE/PTX Series Surge Protection Device_PTX080/PTE080 PTX080-3Y201 PTE080-3Y201 PTX080-3Y201-S/SD PTE080-3Y201-S/SD


Product No:Pro2009427131849
Product Model:PTX080/PTE080 PTX080-3Y201 PTE080-3Y201 PTX080-3Y201-S/SD 
UpdateTime:2010.06.03
Views:2305

         

Summary of technical parameters
Pass the peak flow capacity: Each phase 80KA, each model 40KA
ANSI / IEEE C62.41 installation location: A, B and C
Applications: high-to low-surge level of activity areas, sensitive / important electrical loads including the allocation of cabinet, counter and important user load distribution centers
Warranty: 20 years
Product ID: UL1449 2nd edition, cUL, UL1283
Quality manufacturers: ISO9001: 1994 quality management certificate BSI FM 30833

Mechanical performance parameters
Shell: spray-painted steel structure, all-weather; protection rating NEMA 4 (IP66)
Fixed: built-wear and multi-point lead pipe fixed angle
Connect: # 10 AWG (6 mm2) multi-strand wire
Weight: about 3 kilograms (7 pounds)
Operating temperature:-400F (-400C) - +1850 F (+850 C)

Electrical performance parameters
Protected Mode: All mode, (three-phase Y-10 model) LN, LL (differential mode), LG, NG (common mode)
The frequency of input power: PTX :47-420 Hz; PTE and-SD :47-64 Hz
Response time: PTX ? 1 nanosecond, PTE <1 nanosecond
Capacitance: PTE: for each mode of <10 μF
Diagnostic instructions: LED instructions, each of the normal green, Remote Alarm Interface (C-type dry-type normally open normally closed contact)
Short-circuit current protection: 200 kAIC the 30 amps fuse R-class (the factory does not provide)

Maximum EMI / RFI attenuation-Mil-std-220

1 kHz 10 kHz 100 kHz 1 MHz 10MHz Maximum attenuation frequency 
3 dB 21 dB 40 dB 23 dB 8 dB 40 dB  @113 kHz

Options
Dynamic Tracking Network (ATN ): PTE
The voice of alarm, surge counter and Phase Monitor (SMARTTM )::(- SD suffix)
NEMA Type 4X stainless steel enclosure: (-SS suffix) (prior notice to the factory, there are at least the number of requirements)
Built-in fuse: (-L suffix) (up-to-date drawings at Division I)
Built-melting filament switch: (-D suffix) (up-to-date drawings at Division I)
ARM-3 Remote Alarm Module

Download:


 PTX080_PTE080.pdf